| Title | Separation of chromium(III) and chromium(VI) by ion chromatography and an inductively coupled plasma mass spectrometer as element-selective detector. | | Author(s) | Hagendorfer H, Goessler W | | Institution | Institute of Chemistry-Analytical Chemistry, Karl-Franzens University Graz, Universitaetsplatz 1, 8010 Graz, Austria. | | Source | Talanta 2008 Jul 30; 76(3):656-61. | | Abstract | Due to its extensive use in industrial processes, large quantities of chromium compounds are discharged into the environment. Common approaches for the speciation of Cr employ the determination of Cr(VI) and total Cr. The focus of the present work was a separation of Cr(III) and Cr(VI) species, with a minimum of sample preparation, by keeping an eye on the more relevant and toxic Cr(VI). For the successful simultaneous separation of both chromium species we implemented a RSpak NN-814 4DP (PEEK, 4mmx150mm) multi-mode column using an eluent containing 90mM ammonium sulfate and 10mM ammonium nitrate, adjusted to pH 3.5. At a flow of 0.3mLmin(-1) the separation of both Cr species was possible within 8min. Further the octopole reaction system of the inductively coupled plasma mass spectrometer was systematically studied and optimised to reduce the influence of polyatomic interferences. The major advantage of the developed method compared to published methods is that a derivatisation of the Cr(III) species - an invasion in the speciation - is not required. With the used multi-mode column both chromium species are retained. Furthermore the pH of the mobile phase (pH 3.5) prevents reduction of Cr(VI) as well as precipitation of Cr(III) during the analysis. A limit of determination of approximately 0.5mugL(-1) for both chromium species with an injection volume of 25muL was obtained. The optimised method was successfully applied to the determination of Cr(VI) in cement samples as well as chromium speciation analysis in homeopathic drugs. | | Language | eng | | Pub Type(s) | Journal Article
| | PubMed ID | 18585335 |
|
