Tags

Type your tag names separated by a space and hit enter

[Computer aided design and computer aided manufacture of sacrificial pattern of removable partial denture framework].
Zhonghua Kou Qiang Yi Xue Za Zhi. 2006 Jul; 41(7):432-5.ZK

Abstract

OBJECTIVE

To introduce a method applied in computer aided design and computer aided manufacture (CAD-CAM) of removable partial denture framework for rehabilitating edentulous arch of Kennedy Class II and found a basis for this project.

METHODS

Point cloud data of dental stone model was obtained by laser scanning. The following processes were made: drawing framework outline on the reconstructed triangle mesh model, picking up and processing its inner side data as the data of tissue surface, shelling it for 3-D model of framework, and transferring the data to rapid prototyping equipment for manufacture.

RESULTS

3-D model of the removable partial denture framework was preliminarily accomplished. The resin framework used as a sacrificial pattern was manufactured with the rapid prototyping equipment. The fit between resin framework and plaster model was good.

CONCLUSIONS

This method, as an integrated procedure including data acquisition, 3-D computer modeling and fabrication by rapid prototyping, is feasible to implement CAD-CAM of removable partial denture framework.

Authors+Show Affiliations

Department of Prosthodontics, School of Stomatology, China Medical University, Shenyang 110002, China.No affiliation info availableNo affiliation info availableNo affiliation info availableNo affiliation info available

Pub Type(s)

English Abstract
Journal Article

Language

chi

PubMed ID

17067464

Citation

Wu, Lin, et al. "[Computer Aided Design and Computer Aided Manufacture of Sacrificial Pattern of Removable Partial Denture Framework]." Zhonghua Kou Qiang Yi Xue Za Zhi = Zhonghua Kouqiang Yixue Zazhi = Chinese Journal of Stomatology, vol. 41, no. 7, 2006, pp. 432-5.
Wu L, Lü PJ, Wang Y, et al. [Computer aided design and computer aided manufacture of sacrificial pattern of removable partial denture framework]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2006;41(7):432-5.
Wu, L., Lü, P. J., Wang, Y., Ai, H. J., & Dong, D. Y. (2006). [Computer aided design and computer aided manufacture of sacrificial pattern of removable partial denture framework]. Zhonghua Kou Qiang Yi Xue Za Zhi = Zhonghua Kouqiang Yixue Zazhi = Chinese Journal of Stomatology, 41(7), 432-5.
Wu L, et al. [Computer Aided Design and Computer Aided Manufacture of Sacrificial Pattern of Removable Partial Denture Framework]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2006;41(7):432-5. PubMed PMID: 17067464.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - [Computer aided design and computer aided manufacture of sacrificial pattern of removable partial denture framework]. AU - Wu,Lin, AU - Lü,Pei-jun, AU - Wang,Yong, AU - Ai,Hong-jun, AU - Dong,De-yi, PY - 2006/10/28/pubmed PY - 2009/10/30/medline PY - 2006/10/28/entrez SP - 432 EP - 5 JF - Zhonghua kou qiang yi xue za zhi = Zhonghua kouqiang yixue zazhi = Chinese journal of stomatology JO - Zhonghua Kou Qiang Yi Xue Za Zhi VL - 41 IS - 7 N2 - OBJECTIVE: To introduce a method applied in computer aided design and computer aided manufacture (CAD-CAM) of removable partial denture framework for rehabilitating edentulous arch of Kennedy Class II and found a basis for this project. METHODS: Point cloud data of dental stone model was obtained by laser scanning. The following processes were made: drawing framework outline on the reconstructed triangle mesh model, picking up and processing its inner side data as the data of tissue surface, shelling it for 3-D model of framework, and transferring the data to rapid prototyping equipment for manufacture. RESULTS: 3-D model of the removable partial denture framework was preliminarily accomplished. The resin framework used as a sacrificial pattern was manufactured with the rapid prototyping equipment. The fit between resin framework and plaster model was good. CONCLUSIONS: This method, as an integrated procedure including data acquisition, 3-D computer modeling and fabrication by rapid prototyping, is feasible to implement CAD-CAM of removable partial denture framework. SN - 1002-0098 UR - https://www.unboundmedicine.com/medline/citation/17067464/[Computer_aided_design_and_computer_aided_manufacture_of_sacrificial_pattern_of_removable_partial_denture_framework]_ L2 - http://journal.yiigle.com/LinkIn.do?linkin_type=pubmed&issn=1002-0098&year=2006&vol=41&issue=7&fpage=432 DB - PRIME DP - Unbound Medicine ER -