Tags

Type your tag names separated by a space and hit enter

Quartz crystal microbalance based on torsional piezoelectric resonators.
Rev Sci Instrum. 2007 Jul; 78(7):074903.RS

Abstract

A quartz crystal microbalance (QCM) is described, which is based on a torsional resonator, rather than a conventional thickness-shear resonator. Typical applications are measurements of film thickness in the coating industry and monitoring of biofouling. The torsional QCM is about a factor of 100 less sensitive than the conventional QCM. On the other hand, it can probe film thicknesses in the range of hundreds of microns, which is impossible with the conventional QCM due to viscoelastic artifacts. Data acquisition and data analysis proceed in analogy to the conventional QCM. An indicator of the material's softness can be extracted from the bandwidth of the resonance. Within the small-load approximation, the frequency shift is independent of whether the sample is applied to the face or to the side of the cylinder. Details of the geometry matter if the viscoelastic properties of the sample are of interest.

Authors+Show Affiliations

Institute of Physical Chemistry, Clausthal University of Technology, Arnold-Sommerfeld-Strasse 4, D-38678 Clausthal-Zellerfeld, Germany.No affiliation info availableNo affiliation info availableNo affiliation info availableNo affiliation info availableNo affiliation info availableNo affiliation info available

Pub Type(s)

Journal Article
Research Support, Non-U.S. Gov't

Language

eng

PubMed ID

17672786

Citation

Bücking, W, et al. "Quartz Crystal Microbalance Based On Torsional Piezoelectric Resonators." The Review of Scientific Instruments, vol. 78, no. 7, 2007, p. 074903.
Bücking W, Du B, Turshatov A, et al. Quartz crystal microbalance based on torsional piezoelectric resonators. Rev Sci Instrum. 2007;78(7):074903.
Bücking, W., Du, B., Turshatov, A., König, A. M., Reviakine, I., Bode, B., & Johannsmann, D. (2007). Quartz crystal microbalance based on torsional piezoelectric resonators. The Review of Scientific Instruments, 78(7), 074903.
Bücking W, et al. Quartz Crystal Microbalance Based On Torsional Piezoelectric Resonators. Rev Sci Instrum. 2007;78(7):074903. PubMed PMID: 17672786.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - Quartz crystal microbalance based on torsional piezoelectric resonators. AU - Bücking,W, AU - Du,B, AU - Turshatov,A, AU - König,A M, AU - Reviakine,I, AU - Bode,B, AU - Johannsmann,D, PY - 2007/8/4/pubmed PY - 2007/10/20/medline PY - 2007/8/4/entrez SP - 074903 EP - 074903 JF - The Review of scientific instruments JO - Rev Sci Instrum VL - 78 IS - 7 N2 - A quartz crystal microbalance (QCM) is described, which is based on a torsional resonator, rather than a conventional thickness-shear resonator. Typical applications are measurements of film thickness in the coating industry and monitoring of biofouling. The torsional QCM is about a factor of 100 less sensitive than the conventional QCM. On the other hand, it can probe film thicknesses in the range of hundreds of microns, which is impossible with the conventional QCM due to viscoelastic artifacts. Data acquisition and data analysis proceed in analogy to the conventional QCM. An indicator of the material's softness can be extracted from the bandwidth of the resonance. Within the small-load approximation, the frequency shift is independent of whether the sample is applied to the face or to the side of the cylinder. Details of the geometry matter if the viscoelastic properties of the sample are of interest. SN - 0034-6748 UR - https://www.unboundmedicine.com/medline/citation/17672786/Quartz_crystal_microbalance_based_on_torsional_piezoelectric_resonators_ L2 - https://doi.org/10.1063/1.2756740 DB - PRIME DP - Unbound Medicine ER -