Tags

Type your tag names separated by a space and hit enter

Implant planning and placement using optical scanning and cone beam CT technology.
J Prosthodont. 2008 Aug; 17(6):476-81.JP

Abstract

There is a growing interest in minimally invasive implant therapy as a standard prosthodontic treatment, providing complete restoration of occlusal function. A new treatment method (CADDIMA), which combines both computerized tomographic (CT) and optical laser-scan data for planning and design of surgical guides, implant abutments, and prosthetic devices, is described. Imaging using a "NewTom 3G" cone beam CT scanner and a modified laser triangulation scanner "D200c" is discussed, as are impression and surgical guide fabrication, which allow for flapless, precise implant placement and an accurate provisional prosthesis. The new approach gives the operator full control over the design of the implant prosthesis for planning of proper occlusal relations and shows promise for further evaluation.

Links

Publisher Full Text (DOI)

Authors+Show Affiliations

van der Zel JM
Computerized Dentistry, Academic Centre for Dentistry Amsterdam, Universiteit van Amsterdam and Vrije Universiteit, Amsterdam, The Netherlands. jmvanderzel@wxs.nl

MeSH

Computer-Aided DesignCone-Beam Computed TomographyDental AbutmentsDental Implantation, EndosseousDental ImplantsDental Impression TechniqueDental ModelsDental Prosthesis DesignDental Prosthesis, Implant-SupportedHumansImage Processing, Computer-AssistedImaging, Three-DimensionalJaw Relation RecordLasersMinimally Invasive Surgical ProceduresPatient Care PlanningSurgery, Computer-AssistedUser-Computer Interface

Pub Type(s)

Journal Article
Research Support, Non-U.S. Gov't

Language

eng

PubMed ID

18482361

Citation

van der Zel, Jef M.. "Implant Planning and Placement Using Optical Scanning and Cone Beam CT Technology." Journal of Prosthodontics : Official Journal of the American College of Prosthodontists, vol. 17, no. 6, 2008, pp. 476-81.
van der Zel JM. Implant planning and placement using optical scanning and cone beam CT technology. J Prosthodont. 2008;17(6):476-81.
van der Zel, J. M. (2008). Implant planning and placement using optical scanning and cone beam CT technology. Journal of Prosthodontics : Official Journal of the American College of Prosthodontists, 17(6), 476-81. https://doi.org/10.1111/j.1532-849X.2008.00322.x
van der Zel JM. Implant Planning and Placement Using Optical Scanning and Cone Beam CT Technology. J Prosthodont. 2008;17(6):476-81. PubMed PMID: 18482361.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - Implant planning and placement using optical scanning and cone beam CT technology. A1 - van der Zel,Jef M, Y1 - 2008/05/09/ PY - 2008/5/17/pubmed PY - 2008/12/17/medline PY - 2008/5/17/entrez SP - 476 EP - 81 JF - Journal of prosthodontics : official journal of the American College of Prosthodontists JO - J Prosthodont VL - 17 IS - 6 N2 - There is a growing interest in minimally invasive implant therapy as a standard prosthodontic treatment, providing complete restoration of occlusal function. A new treatment method (CADDIMA), which combines both computerized tomographic (CT) and optical laser-scan data for planning and design of surgical guides, implant abutments, and prosthetic devices, is described. Imaging using a "NewTom 3G" cone beam CT scanner and a modified laser triangulation scanner "D200c" is discussed, as are impression and surgical guide fabrication, which allow for flapless, precise implant placement and an accurate provisional prosthesis. The new approach gives the operator full control over the design of the implant prosthesis for planning of proper occlusal relations and shows promise for further evaluation. SN - 1532-849X UR - https://www.unboundmedicine.com/medline/citation/18482361/Implant_planning_and_placement_using_optical_scanning_and_cone_beam_CT_technology_ L2 - https://doi.org/10.1111/j.1532-849X.2008.00322.x DB - PRIME DP - Unbound Medicine ER -