Tags

Type your tag names separated by a space and hit enter

Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal.
Bioresour Technol. 2008 Dec; 99(18):8691-8.BT

Abstract

This paper describes activation of pine cone with Fenton reagent and determines the removal of Cd(II) and Pb(II) ions from aqueous solution. Changes of the surface properties of adsorbent materials were determined by the FT-IR and SEM analysis after activation of pine cone. The effect of Fe(2+)/H(2)O(2) ratio, ORP, pH and contact time were determined. Different adsorption isotherms were also obtained using concentrations of heavy metal ions ranging from 0.1 to 150mgL(-1). The adsorption process follows pseudo-first-order reaction kinetics and follows the Langmuir adsorption isotherm. The study discusses thermodynamic parameters, including changes in Gibbs free energy, entropy, and enthalpy, for the adsorption of Cd(II) and Pb(II) on activated cone, and revealed that the adsorption process was spontaneous and exothermic under natural conditions. The maximum removal efficiencies were obtained as 91% and 89% at pH 7 with 90 and 105-min contact time for Cd(II) and Pb(II), respectively.

Authors+Show Affiliations

Department of Environmental Engineering, Selcuk University, 42003 Konya, Turkey.argun@selcuk.edu.trNo affiliation info availableNo affiliation info availableNo affiliation info available

Pub Type(s)

Journal Article
Research Support, Non-U.S. Gov't

Language

eng

PubMed ID

18495478

Citation

Argun, Mehmet Emin, et al. "Activation of Pine Cone Using Fenton Oxidation for Cd(II) and Pb(II) Removal." Bioresource Technology, vol. 99, no. 18, 2008, pp. 8691-8.
Argun ME, Dursun S, Karatas M, et al. Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal. Bioresour Technol. 2008;99(18):8691-8.
Argun, M. E., Dursun, S., Karatas, M., & Gürü, M. (2008). Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal. Bioresource Technology, 99(18), 8691-8. https://doi.org/10.1016/j.biortech.2008.04.014
Argun ME, et al. Activation of Pine Cone Using Fenton Oxidation for Cd(II) and Pb(II) Removal. Bioresour Technol. 2008;99(18):8691-8. PubMed PMID: 18495478.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal. AU - Argun,Mehmet Emin, AU - Dursun,Sukru, AU - Karatas,Mustafa, AU - Gürü,Metin, Y1 - 2008/05/20/ PY - 2007/10/11/received PY - 2008/04/04/revised PY - 2008/04/06/accepted PY - 2008/5/23/pubmed PY - 2008/12/17/medline PY - 2008/5/23/entrez SP - 8691 EP - 8 JF - Bioresource technology JO - Bioresour Technol VL - 99 IS - 18 N2 - This paper describes activation of pine cone with Fenton reagent and determines the removal of Cd(II) and Pb(II) ions from aqueous solution. Changes of the surface properties of adsorbent materials were determined by the FT-IR and SEM analysis after activation of pine cone. The effect of Fe(2+)/H(2)O(2) ratio, ORP, pH and contact time were determined. Different adsorption isotherms were also obtained using concentrations of heavy metal ions ranging from 0.1 to 150mgL(-1). The adsorption process follows pseudo-first-order reaction kinetics and follows the Langmuir adsorption isotherm. The study discusses thermodynamic parameters, including changes in Gibbs free energy, entropy, and enthalpy, for the adsorption of Cd(II) and Pb(II) on activated cone, and revealed that the adsorption process was spontaneous and exothermic under natural conditions. The maximum removal efficiencies were obtained as 91% and 89% at pH 7 with 90 and 105-min contact time for Cd(II) and Pb(II), respectively. SN - 0960-8524 UR - https://www.unboundmedicine.com/medline/citation/18495478/Activation_of_pine_cone_using_Fenton_oxidation_for_Cd_II__and_Pb_II__removal_ L2 - https://linkinghub.elsevier.com/retrieve/pii/S0960-8524(08)00326-X DB - PRIME DP - Unbound Medicine ER -