TY - JOUR T1 - Development of a selective molecularly imprinted polymer-based solid-phase extraction for indomethacin from water samples. AU - Yang,Tao, AU - Li,Ya-Hui, AU - Wei,Shuang, AU - Li,Yuan, AU - Deng,Anping, Y1 - 2008/06/25/ PY - 2008/04/21/received PY - 2008/05/28/accepted PY - 2008/05/23/revised PY - 2008/6/26/pubmed PY - 2008/10/17/medline PY - 2008/6/26/entrez SP - 2905 EP - 14 JF - Analytical and bioanalytical chemistry JO - Anal Bioanal Chem VL - 391 IS - 8 N2 - A selective molecularly imprinted solid-phase extraction (MISPE) for indomethacin (IDM) from water samples was developed. Using IDM as template molecule, acrylamide (AM) or methacrylic acid (MAA) as functional monomer, ethylene dimethacrylate (EDMA) as crosslinker, and bulk or suspension polymerization as the synthetic method, three molecularly imprinted polymers (MIPs) were synthesized and characterized with a rebinding experiment. It was found that the MIP of AM-EDMA produced by bulk polymerization showed the highest binding capacity for IDM, and so it was chosen for subsequent experiments, such as those testing the selectivity and recognition binding sites. Scatchard analysis revealed that at least two kinds of binding sites formed in the MIP, with the dissociation constants of 7.8 micromol L(-1) and 127.2 micromol L(-1), respectively. Besides IDM, three structurally related compounds--acemetacin, oxaprozin and ibuprofen--were employed for selectivity tests. It was observed that the MIP exhibited the highest selective rebinding to IDM. Accordingly, the MIP was used as a solid-phase extraction sorbent for the extraction and enrichment of IDM in water samples. The extraction conditions of the MISPE column for IDM were optimized to be: chloroform or water as loading solvent, chloroform with 20% acetonitrile as washing solution, and methanol as eluting solvent. Water samples with or without spiking were extracted by the MISPE column and analyzed by HPLC. No detectable IDM was observed in tap water and the content of IDM in a river water sample was found to be 1.8 ng mL(-1). The extraction efficiencies of the MISPE column for IDM in spiked tap and river water were acceptable (87.2% and 83.5%, respectively), demonstrating the feasibility of the prepared MIP for IDM extraction. SN - 1618-2650 UR - https://www.unboundmedicine.com/medline/citation/18575852/Development_of_a_selective_molecularly_imprinted_polymer_based_solid_phase_extraction_for_indomethacin_from_water_samples_ L2 - https://dx.doi.org/10.1007/s00216-008-2218-2 DB - PRIME DP - Unbound Medicine ER -