Tags

Type your tag names separated by a space and hit enter

Optimisation and validation of a new CE method for the determination of lansoprazole enantiomers in pharmaceuticals.
Electrophoresis. 2009 Aug; 30(16):2940-6.E

Abstract

An analytical method based on CZE to determine lansoprazole enantiomers in pharmaceuticals was developed. The primary factors affecting its separation efficiency, which include chiral selector, pH, buffer concentration, capillary temperature and injection time, were optimised. The best results were obtained by using a background electrolyte consisting of 50 mM phosphate adjusted to pH 2.2, 12 mM beta-CD and 5 mM sodium sulphite, in combination with hydrodynamic injection and a 15 kV separation voltage. Detection limits were calculated from baseline noise and found to be 0.64 mg L(-1) for the R enantiomer and 0.72 mg L(-1) for the S enantiomer. The proposed method was used to analyse three different pharmaceutical preparations with recoveries of 91-102% of the label content.

Authors+Show Affiliations

Department of Analytical Chemistry and Food technology, Faculty of Chemistry, University of Castilla-La Mancha, Ciudad Real, Spain. juanjose.berzas@uclm.esNo affiliation info availableNo affiliation info availableNo affiliation info availableNo affiliation info availableNo affiliation info available

Pub Type(s)

Journal Article
Research Support, Non-U.S. Gov't

Language

eng

PubMed ID

19691058

Citation

Nevado, Juon José Berzas, et al. "Optimisation and Validation of a New CE Method for the Determination of Lansoprazole Enantiomers in Pharmaceuticals." Electrophoresis, vol. 30, no. 16, 2009, pp. 2940-6.
Nevado JJ, Peñalvo GC, Sánchez JC, et al. Optimisation and validation of a new CE method for the determination of lansoprazole enantiomers in pharmaceuticals. Electrophoresis. 2009;30(16):2940-6.
Nevado, J. J., Peñalvo, G. C., Sánchez, J. C., Mochón, M. C., Dorado, R. M., & Navarro, M. V. (2009). Optimisation and validation of a new CE method for the determination of lansoprazole enantiomers in pharmaceuticals. Electrophoresis, 30(16), 2940-6. https://doi.org/10.1002/elps.200800810
Nevado JJ, et al. Optimisation and Validation of a New CE Method for the Determination of Lansoprazole Enantiomers in Pharmaceuticals. Electrophoresis. 2009;30(16):2940-6. PubMed PMID: 19691058.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - Optimisation and validation of a new CE method for the determination of lansoprazole enantiomers in pharmaceuticals. AU - Nevado,Juon José Berzas, AU - Peñalvo,Gregorio Castañeda, AU - Sánchez,Juan Carlos Jiménez, AU - Mochón,Manuel Callejón, AU - Dorado,Rosa María Rodríguez, AU - Navarro,Mercedes Villar, PY - 2009/8/20/entrez PY - 2009/8/20/pubmed PY - 2010/1/6/medline SP - 2940 EP - 6 JF - Electrophoresis JO - Electrophoresis VL - 30 IS - 16 N2 - An analytical method based on CZE to determine lansoprazole enantiomers in pharmaceuticals was developed. The primary factors affecting its separation efficiency, which include chiral selector, pH, buffer concentration, capillary temperature and injection time, were optimised. The best results were obtained by using a background electrolyte consisting of 50 mM phosphate adjusted to pH 2.2, 12 mM beta-CD and 5 mM sodium sulphite, in combination with hydrodynamic injection and a 15 kV separation voltage. Detection limits were calculated from baseline noise and found to be 0.64 mg L(-1) for the R enantiomer and 0.72 mg L(-1) for the S enantiomer. The proposed method was used to analyse three different pharmaceutical preparations with recoveries of 91-102% of the label content. SN - 1522-2683 UR - https://www.unboundmedicine.com/medline/citation/19691058/Optimisation_and_validation_of_a_new_CE_method_for_the_determination_of_lansoprazole_enantiomers_in_pharmaceuticals_ DB - PRIME DP - Unbound Medicine ER -