Tags

Type your tag names separated by a space and hit enter

Factors affecting the formation of iodo-trihalomethanes during oxidation with chlorine dioxide.
J Hazard Mater. 2014 Jan 15; 264:91-7.JH

Abstract

Effects of water characteristics, reaction time, temperature, bromide and iodide ion concentrations, oxidant doses, and pH on formation of iodinated trihalomethanes (I-THM) during oxidation of iodide-containing water with chlorine dioxide (ClO2) were investigated. Among the water samples collected from ten water sources, iodoform (CHI3) was the predominant I-THM and trace amount of chlorodiiodomethane (CHClI2) was occasionally found. CHI3 yields correlated moderately with specific UV absorbance (SUVA) (R(2)=0.79), indicating that hydrophobic aromatic content were important precursors. Longer reaction time led to continued formation of CHI3. I-THM containing bromide was also found in waters containing both bromide and iodide, but CHI3 was dominant. The formation of CHI3 was higher at 25°C than 5°C and 35°C. CHI3 formation showed an increase followed by a decrease trend with increasing ClO2 doses and iodide concentrations and the highest yields occurred at iodide to ClO2 molar ratios of 1-2. pH 8 resulted in the highest CHI3 formation. It should be noted that a high iodide concentration was spiked to waters before adding ClO2 and the results may not reflect the formation yields of iodinated THMs in real conditions, but they provide information about formation trend of I-THM during oxidation of ClO2.

Links

Publisher Full Text (DOI)

Authors+Show Affiliations

Guo W
SYSU-HKUST Research Center for Innovative Environmental Technology (SHRCIET), School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China.
Shan Y
SYSU-HKUST Research Center for Innovative Environmental Technology (SHRCIET), School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China.
Yang X
SYSU-HKUST Research Center for Innovative Environmental Technology (SHRCIET), School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China. Electronic address: yangx36@mail.sysu.edu.cn.

MeSH

BromidesChlorine CompoundsDisinfectionFresh WaterIodine CompoundsOxidation-ReductionOxidesTrihalomethanes

Pub Type(s)

Comparative Study
Journal Article
Research Support, Non-U.S. Gov't

Language

eng

PubMed ID

24280616

Citation

Guo, Wanhong, et al. "Factors Affecting the Formation of Iodo-trihalomethanes During Oxidation With Chlorine Dioxide." Journal of Hazardous Materials, vol. 264, 2014, pp. 91-7.
Guo W, Shan Y, Yang X. Factors affecting the formation of iodo-trihalomethanes during oxidation with chlorine dioxide. J Hazard Mater. 2014;264:91-7.
Guo, W., Shan, Y., & Yang, X. (2014). Factors affecting the formation of iodo-trihalomethanes during oxidation with chlorine dioxide. Journal of Hazardous Materials, 264, 91-7. https://doi.org/10.1016/j.jhazmat.2013.10.064
Guo W, Shan Y, Yang X. Factors Affecting the Formation of Iodo-trihalomethanes During Oxidation With Chlorine Dioxide. J Hazard Mater. 2014 Jan 15;264:91-7. PubMed PMID: 24280616.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - Factors affecting the formation of iodo-trihalomethanes during oxidation with chlorine dioxide. AU - Guo,Wanhong, AU - Shan,Yingchun, AU - Yang,Xin, Y1 - 2013/11/02/ PY - 2013/08/01/received PY - 2013/09/20/revised PY - 2013/10/28/accepted PY - 2013/11/28/entrez PY - 2013/11/28/pubmed PY - 2014/10/7/medline KW - Chlorine dioxide KW - Disinfection by-products KW - I-THM KW - Iodide KW - Iodoform SP - 91 EP - 7 JF - Journal of hazardous materials JO - J Hazard Mater VL - 264 N2 - Effects of water characteristics, reaction time, temperature, bromide and iodide ion concentrations, oxidant doses, and pH on formation of iodinated trihalomethanes (I-THM) during oxidation of iodide-containing water with chlorine dioxide (ClO2) were investigated. Among the water samples collected from ten water sources, iodoform (CHI3) was the predominant I-THM and trace amount of chlorodiiodomethane (CHClI2) was occasionally found. CHI3 yields correlated moderately with specific UV absorbance (SUVA) (R(2)=0.79), indicating that hydrophobic aromatic content were important precursors. Longer reaction time led to continued formation of CHI3. I-THM containing bromide was also found in waters containing both bromide and iodide, but CHI3 was dominant. The formation of CHI3 was higher at 25°C than 5°C and 35°C. CHI3 formation showed an increase followed by a decrease trend with increasing ClO2 doses and iodide concentrations and the highest yields occurred at iodide to ClO2 molar ratios of 1-2. pH 8 resulted in the highest CHI3 formation. It should be noted that a high iodide concentration was spiked to waters before adding ClO2 and the results may not reflect the formation yields of iodinated THMs in real conditions, but they provide information about formation trend of I-THM during oxidation of ClO2. SN - 1873-3336 UR - https://www.unboundmedicine.com/medline/citation/24280616/Factors_affecting_the_formation_of_iodo_trihalomethanes_during_oxidation_with_chlorine_dioxide_ DB - PRIME DP - Unbound Medicine ER -