Tags

Type your tag names separated by a space and hit enter

Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery.
J Surg Res. 2014 May 01; 188(1):88-99.JS

Abstract

BACKGROUND

Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand.

MATERIALS AND METHODS

The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values.

RESULTS

The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced.

CONCLUSIONS

The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist.

Authors+Show Affiliations

Department of Structural and Mechanical Engineering, University of Cantabria, Cantabria, Spain. Electronic address: sancibrr@unican.es.Department of Surgery of the Valdecilla Virtual Hospital, Cantabria Healthcare System, Cantabria, Spain.Department of Electronics Technology, Systems and Automation Engineering, University of Cantabria, Spain.Department of Nursery, Marques de Valdecilla University Hospital, Cantabria, Spain.Department of Medical and Surgical Sciences, University of Cantabria, Cantabria, Spain.General Surgery Service, Colorectal Unit, Marques de Valdecilla University Hospital, Cantabria, Spain.

Pub Type(s)

Evaluation Study
Journal Article
Research Support, Non-U.S. Gov't

Language

eng

PubMed ID

24439133

Citation

Sancibrian, Ramon, et al. "Design and Evaluation of a New Ergonomic Handle for Instruments in Minimally Invasive Surgery." The Journal of Surgical Research, vol. 188, no. 1, 2014, pp. 88-99.
Sancibrian R, Gutierrez-Diez MC, Torre-Ferrero C, et al. Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery. J Surg Res. 2014;188(1):88-99.
Sancibrian, R., Gutierrez-Diez, M. C., Torre-Ferrero, C., Benito-Gonzalez, M. A., Redondo-Figuero, C., & Manuel-Palazuelos, J. C. (2014). Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery. The Journal of Surgical Research, 188(1), 88-99. https://doi.org/10.1016/j.jss.2013.12.021
Sancibrian R, et al. Design and Evaluation of a New Ergonomic Handle for Instruments in Minimally Invasive Surgery. J Surg Res. 2014 May 1;188(1):88-99. PubMed PMID: 24439133.
* Article titles in AMA citation format should be in sentence-case
TY - JOUR T1 - Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery. AU - Sancibrian,Ramon, AU - Gutierrez-Diez,María C, AU - Torre-Ferrero,Carlos, AU - Benito-Gonzalez,Maria A, AU - Redondo-Figuero,Carlos, AU - Manuel-Palazuelos,Jose C, Y1 - 2013/12/27/ PY - 2013/09/24/received PY - 2013/12/11/revised PY - 2013/12/20/accepted PY - 2014/1/21/entrez PY - 2014/1/21/pubmed PY - 2014/5/28/medline KW - Ergonomics KW - Handle design KW - Human factors KW - Laparoscopic KW - Posture KW - Surgical instruments KW - Work-related musculoskeletal disorders SP - 88 EP - 99 JF - The Journal of surgical research JO - J Surg Res VL - 188 IS - 1 N2 - BACKGROUND: Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand. MATERIALS AND METHODS: The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values. RESULTS: The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced. CONCLUSIONS: The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist. SN - 1095-8673 UR - https://www.unboundmedicine.com/medline/citation/24439133/Design_and_evaluation_of_a_new_ergonomic_handle_for_instruments_in_minimally_invasive_surgery_ L2 - https://linkinghub.elsevier.com/retrieve/pii/S0022-4804(13)02199-9 DB - PRIME DP - Unbound Medicine ER -